Display Ike Proposal - HP HSR6600 Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays information about all IKE peers.
Examples
# Display information about all IKE peers.
<Sysname> display ike peer
---------------------------
IKE Peer: rtb4tunn
exchange mode: main on phase 1
pre-shared-key ******
peer id type: ip
peer ip address: 44.44.44.55
local ip address:
peer name:
nat traversal: disable
dpd: dpd1
---------------------------
Table 47 Command output
Field
exchange mode
pre-shared-key
peer id type
peer ip address
local ip address
peer name
nat traversal
dpd
Related commands
ike peer

display ike proposal

Use display ike proposal to view the settings of all IKE proposals.
Description
IKE negotiation mode in phase 1.
Pre-shared key used in phase 1, displayed as ******.
ID type used in phase 1.
IP address of the remote security gateway.
IP address of the local security gateway.
Name of the remote security gateway.
Whether NAT traversal is enabled.
Name of the peer DPD detector.
329