Authentication Lan-Access - HP HSR6600 Command Reference Manual

# Configure ISP domain test to use RADIUS authentication scheme rd for DVPN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication dvpn radius-scheme rd local
Related commands
• local-user
authentication default
•
radius scheme
•

authentication lan-access

Use authentication lan-access to configure the authentication method for LAN users.
Use undo authentication lan-access to restore the default.
Syntax
authentication lan-access { local | none | radius-scheme radius-scheme-name [ local | none ] }
undo authentication lan-access
Default
The default authentication method for the ISP domain is used for LAN users.
Views
ISP domain view
Default command level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
This command is supported only on SAP interface modules that are operating in Layer 2 mode.
The specified RADIUS scheme must have been configured.
Examples
# Configure ISP domain test to use local authentication for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access local
# Configure ISP domain test to use RADIUS authentication scheme rd for LAN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
12