HP HSR6600 Command Reference Manual page 453

dns: Specifies the DNS protocol.
•
• http: Specifies the HTTP protocol.
ip: Specifies the IP protocol.
•
tcp: Specifies the TCP protocol.
•
• udp: Specifies the UDP protocol.
max-connections max-num: Maximum number of the connections.
per-destination: Limits connections by destination IP address.
per-source: Limits connections by source IP address.
per-source-destination: Limits connections by source-desitnation IP address pair.
Usage guidelines
The connection limit rules become invalid when the VPN with which the rules are associated are
removed.
The connection limit rules in a policy are matched in ascending order of rule ID. Take the match order into
consideration when assigning the rules IDs. HP recommends that you arrange the rule by limit granularity
and limit range in ascending order.
Examples
# Configure connection limit rule 1 for policy 0 to limit the maximum number of TCP connections sourced
from 1.1.1.1.
<Sysname> system-view
[Sysname] connection-limit policy 0
[Sysname-connection-limit-policy-0] limit 1 source ip 1.1.1.1 32 protocol tcp
max-connections 200
# Configure connection limit rule 2 to limit the maximum number of UDP connections destined to 2.2.2.2.
[Sysname-connection-limit-policy-0] limit 2 destination ip 2.2.2.2 32 protocol udp
max-connections 200
# Configure connection limit rule 3 to limit the maximum number of IP connections sourced from each
host on the segment 1.1.1.0/24.
[Sysname-connection-limit-policy-0] limit 3 source ip 1.1.1.0 24 protocol ip
max-connections 200 per-source
# Configure connection limit rule 4 to limit the maximum number of IP connections destined to each host
on the segment 2.2.2.0/24.
[Sysname-connection-limit-policy-0] limit 4 destination ip 2.2.2.0 24 protocol ip
max-connections 200 per-destination
# Configure connection limit rule 5 to limit the maximum number of IP connections from vpn1 to vpn2.
[Sysname-connection-limit-policy-0] limit 5 source ip any source-vpn vpn1 destination ip
any destination-vpn vpn2 protocol ip max-connections 200
Related commands
connection-limit policy
•
display connection-limit policy
•
440