Bind-Attribute - HP HSR6600 Command Reference Manual

commands. For more information, see Network Management and Monitoring Command
Reference.
vlan vlan-id: Specifies the authorized VLAN, where vlan-id ranges from 1 to 4094. After passing
authentication, a local user can access the resources in this VLAN.
work-directory directory-name: Specifies the work directory, if the user or users use the FTP or SFTP
service. The directory-name argument is a case-insensitive string of 1 to 135 characters. The directory
must already exist. By default, an FTP or SFTP user can access the root directory of the device.
Usage guidelines
Every configurable authorization attribute has its definite application environments and purposes.
Consider the service types of users when assigning authorization attributes.
Authorization attributes configured for a user group are effective for all local users in the group. You can
group local users to improve configuration and management efficiency.
An authorization attribute configured in local user view takes precedence over the same attribute
configured in user group view. If an authorization attribute is configured in user group view but not in
local user view, the setting in user group view takes effect.
To make sure that FTP and SFTP users can access the directory after a switchover between the main MPU
and the backup MPU, do not specify slot information for the work directory.
If only one user is playing the role of security log administrator in the system, you cannot delete the user
account or remove or change the user's role, unless you first configure another user as a security log
administrator.
A local user can play only one role at a time. If you perform the role configuration repeatedly, only the
last role configuration takes effect.
Examples
# Configure the authorized VLAN of local user abc as VLAN 2.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] authorization-attribute vlan 2
# Configure the authorized VLAN of user group abc as VLAN 3.
<Sysname> system-view
[Sysname] user-group abc
[Sysname-ugroup-abc] authorization-attribute vlan 3

bind-attribute

Use bind-attribute to configure binding attributes for a local user.
Use undo bind-attribute to remove binding attributes of a local user.
Syntax
bind-attribute { call-number call-number [ : subcall-number ] | ip ip-address | location port slot-number
subslot-number port-number | mac mac-address | vlan vlan-id } *
undo bind-attribute { call-number | ip | location | mac | vlan } *
Default
No binding attribute is configured for a local user.
43