Display Domain - HP HSR6600 Command Reference Manual

display domain

Use display domain to display the configuration of ISP domains.
Syntax
display domain [ isp-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
isp-name: Name of an existing ISP domain, a string of 1 to 24 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any ISP domain, the command displays the configuration of all ISP domains.
Examples
# Display the configuration of all ISP domains.
<Sysname> display domain
0 Domain : system
State :
Access-limit :
Accounting method : Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes :
1 Domain : test
State : Active
Access-limit : Disabled
Accounting method : Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Lan-access authentication scheme
Active
Disabled
: local
: local
: local
: local
: local
: local
: radius:test, local
31