Primary Authentication (Hwtacacs Scheme View) - HP HSR6600 Command Reference Manual

Default command level
2: System level
Parameters
ip-address: IP address of the primary HWTACACS accounting server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the primary HWTACACS accounting server. It is a TCP port in the
range of 1 to 65535 and defaults to 49.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary HWTACACS
accounting server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31
characters. If the server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
If you execute the command multiple times, the most recent configuration takes effect.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server only affects accounting processes that occur after
the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Specify the IP address and port number of the primary accounting server for HWTACACS scheme
test1 as 10.163.155.12 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49
Related commands
display hwtacacs
•
• vpn-instance (HWTACACS scheme view)

primary authentication (HWTACACS scheme view)

Use primary authentication to specify the primary HWTACACS authentication server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary HWTACACS authentication server is specified.
107