Firewall Default; Firewall Enable - HP HSR6600 Command Reference Manual

Hide thumbs Also See for HSR6600:
Table of Contents

Advertisement

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display packet filtering statistics on all interfaces.
<Sysname> display firewall-statistics all

firewall default

Use firewall default to specify the default firewall filtering action of the IPv4 firewall.
Syntax
firewall default { deny | permit } { all | slot slot-number }
Default
The default filtering action of the IPv4 firewall is permitting packets to pass (permit).
Views
System view
Default command level
2: System level
Parameters
deny: Specifies the filtering action as denying packets to pass the firewall.
permit: Specifies the filtering action as permitting packets to pass the firewall.
all: Specifies that the configuration applies to all interface cards.
slot slot-number: Specifies that the configuration applies to the interface card in the specified slot.
The following matrix shows the all keyword, the slot slot-number option, and hardware compatibility:
Hardware
6602
HSR6602
6604/6608/6616
Examples
# Specify the default filtering action of the IPv4 firewall as denying packets to pass.
<Sysname> system-view
[Sysname] firewall default deny

firewall enable

Use firewall enable to enable the IPv4 firewall function.
Use undo firewall enable to disable the IPv4 firewall function.
Compatibility
No
Yes
Yes
404

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 6600

Table of Contents