Port-Security Timer Autolearn Aging; Port-Security Timer Disableport - HP HSR6600 Command Reference Manual

Examples
# Enable port security and set port GigabitEthernet 3/0/1 in secure mode.
<Sysname> system-view
[Sysname] port-security enable
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] port-security port-mode secure
# Change the port security mode of port GigabitEthernet 3/0/1 to userLogin.
[Sysname-GigabitEthernet3/0/1] undo port-security port-mode
[Sysname-GigabitEthernet3/0/1] port-security port-mode userlogin
Related commands
display port-security

port-security timer autolearn aging

Use port-security timer autolearn aging to set the secure MAC aging timer. The timer applies to all sticky
or dynamic secure MAC addresses.
Use undo port-security timer autolearn aging to restore the default.
Syntax
port-security timer autolearn aging time-value
undo port-security timer autolearn aging
Default
Secure MAC addresses never age out.
Views
System view
Default command level
2: System level
Parameters
time-value: Sets the aging timer in minutes for secure MAC addresses. The value range is 0 to 129600.
To disable the aging timer, set the timer to 0.
Examples
# Set the secure MAC aging timer to 30 minutes.
<Sysname> system-view
[Sysname] port-security timer autolearn aging 30
Related commands
display port-security
•
• port-security mac-address security

port-security timer disableport

Use port-security timer disableport to set the silence period during which the port remains disabled.
Use undo port-security timer disableport to restore the default.
207