Reset Session - HP HSR6600 Command Reference Manual

Total find: 2
Table 66 Command output
Field
Initiator:
Responder:
Pro
VPN-Instance/VLAN ID/VLL ID
App
State
Start Time
TTL
Zone(in)
Zone(out)
Received packet(s)(Init)
Received packet(s)(Reply)
Total find

reset session

Use reset session to clear sessions.
Syntax
reset session [ slot slot-number ] [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol-type
{ icmp | raw-ip | tcp | udp } ] [ source-port source-port ] [ destination-port destination-port ]
[ vpn-instance vpn-instance-name ]
Description
Session information of the initiator.
Session information of the responder.
Transport layer protocol, TCP, UDP, ICMP, or Raw IP..
MPLS L3VPN that the session belongs to and the VLAN
and INLINE that the session belongs to during Layer 2
forwarding.
Application layer protocol, FTP, DNS, MSN or QQ.
Unknown indicates protocol type of a non-well-known
port.
Session status. Possible values are:
•
Accelerate.
•
SYN.
•
TCP-EST.
•
FIN.
•
UDP-OPEN.
•
UDP-READY.
•
ICMP-OPEN.
•
ICMP-CLOSED.
•
RAWIP-OPEN.
•
RAWIP-READY.
Session establishment time.
Remaining lifetime of the session, in seconds.
Security zone (in).
Security zone (out).
Counts of packets and bytes from the initiator to the
responder.
Counts of packets and bytes from the responder to the
initiator.
Total number of found sessions.
427