Firewall Http Url-Filter Host Ip-Address - HP HSR6600 Command Reference Manual

Default
The URL address filtering function is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the URL address filtering function.
<Sysname> system-view
[Sysname] firewall http url-filter host enable
Related commands
display firewall http url-filter host

firewall http url-filter host ip-address

Use firewall http url-filter host ip-address to enable/disable support for IP address in URL address
filtering, that is, to permit or deny web requests using IP addresses for access to websites.
Syntax
firewall http url-filter host ip-address { deny | permit }
Default
The URL address filtering function denies web requests using IP addresses for access to websites.
Views
System view
Default command level
2: System level
Parameters
deny: Specifies to deny a web request whose destination URL is present in IP address.
permit: Specifies to permit a web request whose destination URL is present in IP address.
Usage guidelines
This configuration takes effect only after the URL address filtering function is enabled.
Examples
# Configure to permit web requests using IP addresses for access to websites.
<Sysname> system-view
[Sysname] firewall http url-filter host ip-address permit
Related commands
display firewall http url-filter host
•
firewall http url-filter host enable
•
452