Firewall Ipv6 Default - HP HSR6600 Command Reference Manual

Syntax
firewall enable { all | slot slot-number }
undo firewall enable
Default
The IPv4 firewall function is disabled.
Views
System view
Default command level
2: System level
Parameters
all: Specifies that the configuration applies to all interface cards.
slot slot-number: Specifies that the configuration applies to the interface card in the specified slot.
The following matrix shows the all keyword, the slot slot-number option, and hardware compatibility:
Hardware
6602
HSR6602
6604/6608/6616
Examples
# Enable the IPv4 firewall function.
<Sysname> system-view
[Sysname] firewall enable

firewall ipv6 default

Use firewall ipv6 default to specify the default firewall filtering action of the IPv6 firewall.
Syntax
firewall ipv6 default { deny | permit }
Default
The default filtering action of IPv6 firewall is permitting packets to pass (permit).
Views
System view
Default command level
2: System level
Parameters
deny: Specifies the filtering action as denying packets to pass the firewall.
permit: Specifies the filtering action as permitting packets to pass the firewall.
Compatibility
No
Yes
Yes
405