Password-Control Login Idle-Time; Password-Control Login-Attempt - HP HSR6600 Command Reference Manual

password-control login idle-time

Use password-control login idle-time to set the maximum account idle time. If a user account is idle for
this period of time, you can no longer use this account to log in to the device.
Use undo password-control login idle-time to restore the default.
Syntax
password-control login idle-time idle-time
undo password-control login idle-time
Default
You cannot use a user account to log in to the device if the account has been idle for 90 days.
Views
System view
Default command level
2: System level
Parameters
idle-time: Specifies the maximum account idle time in days, in the range of 0 to 365. 0 means no
restriction for account idle time.
Examples
# Set the maximum account idle time to 30 days.
<Sysname> system-view
[Sysname] password-control login idle-time 30
Related commands
display password-control

password-control login-attempt

Use password-control login-attempt to specify the maximum number of consecutive failed login attempts
and the action to be taken when a user fails to log in after the specified number of attempts.
Use undo password-control login-attempt to restore the default.
Syntax
password-control login-attempt login-times [ exceed { lock | lock-time time | unlock } ]
undo password-control login-attempt
Default
The maximum number of consecutive failed login attempts is 3 and a user failing to log in after the
specified number of attempts must wait for 1 minute before trying again.
Views
System view
Default command level
2: System level
225