Reset Mac-Authentication Statistics - HP HSR6600 Command Reference Manual

Examples
# Configure a shared account for MAC authentication users, and set the username as abc and password
as a plaintext string of xyz.
<Sysname> system-view
[Sysname] mac-authentication user-name-format fixed account abc password simple xyz
# Configure a shared account for MAC authentication users, and set the username as abc and password
as a ciphertext string of $c$3$Uu9Dh4xRKWa8RHW3TFnNTafBbhdPAg.
<Sysname> system-view
[Sysname] mac-authentication user-name-format fixed account abc password cipher
$c$3$Uu9Dh4xRKWa8RHW3TFnNTafBbhdPAg
# Use MAC-based user accounts for MAC authentication users, and each MAC address must be
hyphenated, and in upper case.
<Sysname> system-view
[Sysname] mac-authentication user-name-format mac-address with-hyphen uppercase
Related commands
display mac-authentication

reset mac-authentication statistics

Use reset mac-authentication statistics to clear MAC authentication statistics.
Syntax
reset mac-authentication statistics [ interface interface-list ]
Views
User view
Default command level
2: System level
Parameters
interface interface-list: Specifies a port list, in the format of { interface-type interface-number [ to
interface-type interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10 port
ranges. The start port and end port of a port range must be of the same type and the end port number
must be greater than the start port number. A port range defined without the to interface-type
interface-number portion comprises only one port.
Usage guidelines
If no port list is specified, the command clears all global and port-specific MAC authentication statistics.
If a port list is specified, the command clears the MAC authentication statistics on the specified ports.
Examples
# Clear MAC authentication statistics on port GigabitEthernet 3/0/1.
<Sysname> reset mac-authentication statistics interface gigabitethernet 3/0/1
Related commands
display mac-authentication
155