Telnet Ipv6 - HP A8800 Series Fundamentals Command Reference

Default level
2: System level
Parameters
interface interface-type interface-number: Specifies a source interface. The primary IP address of this
interface will be used as the source IPv4 address of outgoing Telnet packets.
ip ip-address: Specifies a source IPv4 address.
Description
Use telnet client source to specify a source IPv4 address or a source interface for outgoing Telnet packets
when the device serves as a Telnet client.
Use undo telnet client source to remove the configuration.
By default, no source IPv4 address or source interface is specified for outgoing Telnet packets. The source
IPv4 address is selected by the routing module.
The source IPv4 address or source interface specified by this command is applicable to all Telnet
connections.
If you use both this command and the telnet command to specify the source IPv4 address or source
interface, the source IPv4 address or interface specified by the telnet command takes effect.
Related commands: display telnet client configuration.
Examples
# Specify the source IPv4 address for outgoing Telnet packets when the device serves as a Telnet client
as 1.1.1.1.
<Sysname> system-view
[Sysname] telnet client source ip 1.1.1.1

telnet ipv6

Syntax
telnet ipv6 remote-host [ -i interface-type interface-number ] [ port-number ] [ vpn-instance
vpn-instance-name ]
View
User view
Default level
0: Visit level
Parameters
remote-host: IP address or host name of a remote system, a case-insensitive string of 1 to 46 characters.
-i interface-type interface-number: Specifies the outbound interface for sending Telnet packets, where
interface-type interface-number represents the interface type and number. You need to provide the -i
interface-type interface-number argument if the destination address is a link-local address.
port-number: TCP port number for the remote system to provide Telnet services. It ranges from 0 to 65535
and defaults to 23.
16