HP HSR6600 Command Reference Manual page 439

If no slot number is specified, the command displays the sessions on all cards.
If multiple keywords are specified, the command displays the sessions that match all these criteria.
This command is not supported by the SPE-FWM-200, SPE-IPS-200, SPE-ACG-200, and FIP600 cards.
Examples
# Display brief information about all sessions.
<Sysname> display session table
Initiator:
Source IP/Port : 192.168.1.18/2048
Dest IP/Port
Pro
VPN-Instance/VLAN ID/VLL ID:
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port
Pro
VPN-Instance/VLAN ID/VLL ID:
Total find: 2
# Display detailed information about all sessions.
<Sysname> display session table verbose
Initiator:
Source IP/Port : 192.168.1.19/137
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.255/137
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Pro: UDP(17)
Start time: 2009-03-17 10:39:43
Root
Received packet(s)(Init): 6 packet(s) 468 byte(s)
Received packet(s)(Reply): 0 packet(s) 0 byte(s)
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.55/23
Dest IP/Port
VPN-Instance/VLAN ID/VLL ID:
Pro: TCP(6)
Start time: 2009-03-17 09:30:33
Root
Received packet(s)(Init): 1173 packet(s) 47458 byte(s)
Received packet(s)(Reply): 1168 packet(s) 61845 byte(s)
: 192.168.1.55/768
: ICMP(ICMP(1))
: 192.168.1.55/23
: TCP(TCP(6))
: 192.168.1.255/137
: 192.168.1.19/137
App: NBT-name
TTL: 2s
Zone(in): Management
Zone(out): Local
: 192.168.1.55/23
: 192.168.1.18/1212
App: TELNET
TTL: 3600s
Zone(in): Management
Zone(out): Local
State: UDP-OPEN
State: TCP-EST
426