Ssh2 - HP HSR6600 Command Reference Manual

Usage guidelines
To make sure the Stelnet client and the Stelnet server can communicate with each other, and to improve
the manageability of Stelnet clients in the authentication service, HP recommends you to specify a
loopback interface as the source interface.
Examples
# Specify the source IPv4 address of the Stelnet client as 192.168.0.1.
<Sysname> system-view
[Sysname] ssh client source ip 192.168.0.1
Related commands
display ssh client source

ssh2

Use ssh2 to establish a connection to an IPv4 Stelnet server and specify the public key algorithm, the
preferred key exchange algorithm, and the preferred encryption algorithms and preferred HMAC
algorithms between the client and server.
Syntax
In non-FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key rsa | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
Views
User view
Default command level
0: Visit level
Parameters
server: Specifies an IPv4 server by its address or host name, a case-insensitive string of 1 to 20
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where the
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is on the public
network, do not specify this option.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. In non-FIPS mode, the
algorithm is either dsa or rsa. In FIPS mode, the algorithm is rsa.
dsa: Specifies the public key algorithm dsa.
•
• rsa: Specifies the public key algorithm rsa.
383