Reset Ipsec Statistics; Reverse-Route - HP HSR6600 Command Reference Manual

IPsec SAs appear in pairs. If you specify the parameters keyword to clear an IPsec SA, the IPsec SA in the
other direction is also automatically cleared.
If you do not specify any parameter, the command clears all IPsec SAs.
Examples
# Clear all IPsec SAs.
<Sysname> reset ipsec sa
# Clear the IPsec SA with a remote IP address of 10.1.1.2.
<Sysname> reset ipsec sa remote 10.1.1.2
# Clear all IPsec SAs of IPsec policy template policy1.
<Sysname> reset ipsec sa policy policy1
# Clear the IPsec SA of the IPsec policy with the name of policy1 and sequence number of 10.
<Sysname> reset ipsec sa policy policy1 10
# Clear the IPsec SA with a remote IP address of 10.1.1.2, security protocol of AH, and SPI of 10000.
<Sysname> reset ipsec sa parameters 10.1.1.2 ah 10000
# Clear all IPsec SAs of IPsec profile policy1.
<Sysname> reset ipsec sa policy policy1
Related commands
display ipsec sa

reset ipsec statistics

Use reset ipsec statistics to clear IPsec packet statistics.
Syntax
reset ipsec statistics
Views
User view
Default command level
1: Monitor level
Examples
# Clear IPsec packet statistics.
<Sysname> reset ipsec statistics
Related commands
display ipsec statistics

reverse-route

Use reverse-route to enable and configure the IPsec Reverse Route Inject (RRI) feature.
Use undo reverse-route to disable IPsec RRI.
308