Password-Control Authentication-Timeout - HP HSR6600 Command Reference Manual

undo password-control alert-before-expire
Default
A user is notified of pending password expiration 7 days before the user's password expires.
Views
System view
Default command level
2: System level
Parameters
alert-time: Specifies the number of days before a user's password expires during which the user is
notified of the pending password expiration. The value range is 1 to 30.
Examples
# Configure the device to notify a user about pending password expiration 10 days before the user's
password expires.
<Sysname> system-view
[Sysname] password-control alert-before-expire 10

password-control authentication-timeout

Use password-control authentication-timeout to set the user authentication timeout time.
Use undo password-control authentication-timeout to restore the default.
Syntax
password-control authentication-timeout authentication-timeout
undo password-control authentication-timeout
Default
The user authentication timeout time is 60 seconds.
Views
System view
Default command level
2: System level
Parameters
authentication-timeout: Specifies the user authentication timeout time in seconds. The value range is 30
to 120.
Examples
# Set the user authentication timeout time to 40 seconds.
<Sysname> system-view
[Sysname] password-control authentication-timeout 40
219