Defense Udp-Flood Enable; Defense Udp-Flood Ip - HP HSR6600 Command Reference Manual
Hide thumbs
Also See for HSR6600:
- Configuration manual (614 pages) ,
- Troubleshooting manual (41 pages) ,
- Security configuration manual (559 pages)
Table of Contents
Advertisement
Examples
# Configure attack protection policy 1 to drop UDP flood packets.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1] defense udp-flood action drop-packet
Related commands
defense udp-flood enable
•
defense udp-flood ip
•
defense udp-flood rate-threshold
•
•
display attack-defense policy
defense udp-flood enable
Use defense udp-flood enable to enable UDP flood attack protection.
Use undo defense udp-flood enable to restore the default.
Syntax
defense udp-flood enable
undo defense udp-flood enable
Default
UDP flood attack protection is disabled.
Views
Attack protection policy view
Default command level
2: System level
Examples
# Enable UDP flood attack protection in attack protection policy 1.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1] defense udp-flood enable
Related commands
•
defense udp-flood action drop-packet
defense udp-flood rate-threshold
•
•
defense udp-flood ip
display attack-defense policy
•
defense udp-flood ip
Use defense udp-flood ip to configure the action and silence thresholds for UDP flood attack protection
of a specific IP address.
Use undo defense udp-flood ip to remove the configuration.
471
Advertisement
Table of Contents
