Fips Configuration Commands; Display Fips Status; Fips Mode Enable - HP HSR6600 Command Reference Manual

FIPS configuration commands

display fips status

Use display fips status to display the current FIPS mode state.
Syntax
display fips status
Views
Any view
Default command level
1: Monitor level
Examples
# Display the current FIPS mode state.
<Sysname> display fips status
FIPS mode is enabled
Related commands

fips mode enable

fips mode enable
Use fips mode enable to enable FIPS mode.
Use undo fips mode enable to disable FIPS mode.
Syntax
fips mode enable
undo fips mode enable
Default
The FIPS mode is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
The FIPS mode complies with FIPS 140-2.
After FIPS mode is enabled, delete the FIPS 140-2-incompliant local user service type Telnet, HTTP, or FTP
before you reboot the device.
To enter the FIPS mode, follow these steps:
517