Dot1X Timer - HP HSR6600 Command Reference Manual

Examples
# Configure ports GigabitEthernet 3/0/1 to 1/8 to log off users accessing the network through a proxy.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check logoff
[Sysname] dot1x supp-proxy-check logoff interface gigabitethernet 3/0/1 to
gigabitethernet 3/0/8
# Configure port GigabitEthernet 3/0/9 to send a trap when a user is detected accessing the network
through a proxy.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check trap
[Sysname] dot1x supp-proxy-check trap interface gigabitethernet 3/0/9
Or
<Sysname> system-view
[Sysname] dot1x supp-proxy-check trap
[Sysname] interface gigabitethernet 3/0/9
[Sysname-GigabitEthernet3/0/9] dot1x supp-proxy-check trap
Related commands
display dot1x

dot1x timer

Use dot1x timer to set 802.1X timers.
Use undo dot1x timer to restore the defaults.
Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
reauth-period
supp-timeout-value | tx-period tx-period-value }
undo dot1x timer { handshake-period | quiet-period | reauth-period | server-timeout | supp-timeout
| tx-period }
Default
The handshake timer is 15 seconds, the quiet timer is 60 seconds, the periodic re-authentication timer is
3600 seconds, the server timeout timer is 100 seconds, the client timeout timer is 30 seconds, and the
username request timeout timer is 30 seconds.
Views
System view
Default command level
2: System level
Parameters
handshake-period-value: Sets the handshake timer in seconds. It is in the range of 5 to 1024.
quiet-period-value: Sets the quiet timer in seconds. It is in the range of 10 to 120.
reauth-period-value: Sets the periodic re-authentication timer in seconds. It is in the range of 60 to 7200.
server-timeout-value: Sets the server timeout timer in seconds. It is in the range of 100 to 300.
reauth-period-value | server-timeout
141
server-timeout-value | supp-timeout