Authorization Ssl-Vpn - HP HSR6600 Command Reference Manual

Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization exchange. In this case, an authenticated PPP user can access
the network directly.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure ISP domain test to use local authorization for PPP users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ppp local
# Configure ISP domain test to use RADIUS authorization scheme rd for PPP users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization ppp radius-scheme rd local
Related commands
• local-user
authorization default
•
• hwtacacs scheme
radius scheme
•

authorization ssl-vpn

Use authorization ssl-vpn to configure the authorization method for SSL VPN users.
Use undo authorization ssl-vpn to restore the default.
Syntax
authorization ssl-vpn radius-scheme radius-scheme-name
undo authorization ssl-vpn
Default
The default authorization method for the ISP domain is used for SSL VPN users.
24