Display Session Hardware - HP HSR6600 Command Reference Manual

Syntax
display session aging-time [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You can use this command to display the default session aging timers in different protocol states before
these session aging timers are adjusted.
Examples
# Display the current session aging timers in different protocol states.
<Sysname> display session aging-time
Protocol
syn
tcp-est
fin
udp-open
udp-ready
icmp-open
icmp-closed
rawip-open
rawip-ready
accelerate
Table 63 Command output
Field
Protocol
Aging-time(s)
Related commands
session aging-time

display session hardware

Use display session hardware to display session count on the specified card.
Aging-time(s)
10
3600
10
10
30
30
10
30
60
5
Description
Protocol status.
Session aging time, in seconds.
420