Peer - HP HSR6600 Command Reference Manual

Syntax
nat traversal
undo nat traversal
Default
The NAT traversal function is disabled.
Views
IKE peer view
Default command level
2: System level
Examples
# Enable the NAT traversal function for IKE peer peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] nat traversal

peer

Use peer to set the subnet type of the peer security gateway for IKE negotiation.
Use undo peer to restore the default.
Syntax
peer { multi-subnet | single-subnet }
undo peer
Default
The subnet is a single one.
Views
IKE peer view
Default command level
2: System level
Parameters
multi-subnet: Sets the subnet type to multiple.
single-subnet: Sets the subnet type to single.
Usage guidelines
Use this command to enable interoperability with a NetScreen device.
Examples
# Set the subnet type of the peer security gateway to multiple.
<Sysname> system-view
[Sysname] ike peer xhy
[Sysname-ike-peer-xhy] peer multi-subnet
346