Display Ipsec Policy-Template - HP HSR6600 Command Reference Manual

Field
Protocol
sequence number
mode
encapsulation mode
selector mode
ike-peer name
PFS
DH group
tunnel local address
tunnel remote address
transform-set name
policy enable
tfc enable
inbound/outbound AH/ESP setting
group name
Related commands
ipsec policy (system view)

display ipsec policy-template

Use display ipsec policy-template to display information about IPsec policy templates.
Syntax
display ipsec policy-template [ brief | name template-name [ seq-number ] ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Description
Name of the protocol to which the IPsec policy is applied. (This
field is not displayed when the IPsec policy is not applied to any
routing protocol.)
Sequence number of the IPsec policy.
Negotiation mode of the IPsec policy:
•
manual—Manual mode.
•
isakmp—IKE negotiation mode.
•
template—IPsec policy template mode.
•
gdoi—GDOI mode.
IPsec packet encapsulation mode:
•
tunnel—Tunnel mode.
•
transport—Transport mode.
Data flow protection mode of the IPsec policy, standard or
aggregation.
IKE peer referenced by the IPsec policy.
Whether perfect forward secrecy is enabled.
Used DH group. Its value can be 1, 2, 5, or 14.
Local IP address of the tunnel.
Remote IP address of the tunnel.
Transform set referenced by the IPsec policy.
Whether the IPsec policy is enabled or not.
Whether TFC padding is enabled.
AH/ESP settings in the inbound/outbound direction, including the
SPI and keys.
GDOI group name.
Support for this field depends on the device model.
278