Portal Nas-Id - HP HSR6600 Command Reference Manual

Use undo portal max-user to restore the default.
Syntax
portal max-user max-number
undo portal max-user
Default
The maximum number of portal users is that supported by the system.
Views
System view
Default command level
2: System level
Parameters
max-number: Maximum number of online portal users allowed in the system.
The following matrix shows the value range for the max-number argument on different 6600/HSR6600
routers:
Argument
max-number
Usage guidelines
If the maximum number of portal users specified in the command is less than that of the current online
portal users, the command can be executed successfully and does not impact the online portal users, but
the system does not allow new portal users to log in until the number drops down below the limit.
Examples
# Set the maximum number of portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100

portal nas-id

Use portal nas-id to specify the NAS ID value carried in a RADIUS request.
Use undo portal nas-id to restore the default.
Syntax
portal nas-id nas-identifier
undo portal nas-id
Default
The device name specified through the sysname command is used as the NAS ID of a RADIUS request.
For information about the sysname command, see Fundamentals Command Reference.
6602 HSR6602
1 to 10000 1 to 10000
178
6604/6608/6616
•
RPE-X1 MPU: 1 to 10000
•
RSE-X1 MPU: 1 to 12000
•
MCP MPU: 1 to 10000