Radius Scheme - HP HSR6600 Command Reference Manual

Default command level
2: System level
Parameters
ipv4-address: IPv4 address in dotted decimal notation. It must be an address of the device and cannot
be 0.0.0.0, 255.255.255.255, a class D address, or a class E address.
ipv6 ipv6-address: Specifies an IPv6 address. It must be a unicast address of the device and cannot be
a link-local address.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the source IPv4 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. With a VPN specified,
the command specifies a private-network source IPv4 address. With no VPN specified, the command
specifies a public-network source IPv4 address.
Usage guidelines
You can specify up to one public-network source IP address and 15 private-network source IP addresses.
A newly specified public-network source IP address overwrites the previous one. Each VPN can have only
one private-network source IP address. A private-network source IP address newly specified for a VPN
overwrites the previous one.
The source IP address of RADIUS packets that a NAS sends must match the IP address of the NAS that
is configured on the RADIUS server. A RADIUS server identifies a NAS by its IP address. Upon receiving
a RADIUS packet, a RADIUS server checks whether the source IP address of the packet is the IP address
of any managed NAS. If it is, the server processes the packet. If it is not, the server drops the packet.
The setting configured by the nas-ip command in RADIUS scheme view is only for the RADIUS scheme,
whereas that configured by the radius nas-ip command in system view is for all RADIUS schemes. The
setting in RADIUS scheme view takes precedence.
Examples
# Set the IP address for the device to use as the source address of the RADIUS packets to 129.10.10.1.
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1
Related commands
nas-ip

radius scheme

Use radius scheme to create a RADIUS scheme and enter RADIUS scheme view.
Use undo radius scheme to delete a RADIUS scheme.
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
Default
No RADIUS scheme is defined.
Views
System view
79