HP HSR6600 Command Reference Manual page 388

Syntax
In non-FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key rsa | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
Views
User view
Default command level
3: Manage level
Parameters
server: Specifies an IPv4 server by its address or host name, a case-insensitive string of 1 to 20
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where the
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is on the public
network, do not specify this option.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. In non-FIPS mode, the
algorithm is either dsa or rsa. In FIPS mode, the algorithm is rsa.
dsa: Specifies the public key algorithm dsa.
•
rsa: Specifies the public key algorithm rsa.
•
prefer-compress: Specifies the preferred compression algorithm. By default, the compression algorithm is
not used.
zlib: Specifies the compression algorithm ZLIB.
•
• zlib-openssh: Specifies the compression algorithm ZLIB@openssh.com.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is aes128.
• 3des: Specifies the encryption algorithm 3des-cbc. This keyword is not available in FIPS mode.
aes128: Specifies the encryption algorithm aes128-cbc.
•
aes256: Specifies the encryption algorithm aes256-cbc. This keyword is not available in non-FIPS
•
mode.
des: Specifies the encryption algorithm des-cbc. This keyword is not available in FIPS mode.
•
prefer-ctos-hmac: Specifies the preferred client-to-server HMAC algorithm. The default is sha1-96.
md5: Specifies the HMAC algorithm hmac-md5. This keyword is not available in FIPS mode.
•
md5-96: Specifies the HMAC algorithm hmac-md5-96. This keyword is not available in FIPS mode.
•
• sha1: Specifies the HMAC algorithm hmac-sha1.
sha1-96: Specifies the HMAC algorithm hmac-sha1-96.
•
375