Ip Source Guard Configuration Commands; Display Ip Source Binding - HP HSR6600 Command Reference Manual

IP source guard configuration commands

IP source guard configuration commands are available only for SAP interface modules operating in
Layer 2 mode.

display ip source binding

Use display ip source binding to display IPv4 source guard entries.
Syntax
display ip source binding [ static ] [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
static: Displays static IPv4 source guard entries. If you do not specify this keyword, the command displays
all static and dynamic IPv4 source guard entries.
interface interface-type interface-number: Displays IPv4 source guard entries of the interface specified by
its type and number.
ip-address ip-address: Displays IPv4 source guard entries of an IP address.
mac-address mac-address: Displays IPv4 source guard entries of an MAC address (in the format H-H-H).
slot slot-number: Displays IPv4 source guard entries on a card. The slot-number argument specifies the
number of the slot that holds the card.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When you do not use the static keyword, the command displays both static and dynamic IPv4 source
guard entries. If you specify neither a port nor an interface card, the command displays static and
dynamic IPv4 source guard entries on all ports.
When you use the static keyword, the command displays static IPv4 source guard entries. If you specify
neither a port nor an interface card, the command displays static IPv4 source guard entries on all ports.
Examples
# Display all IPv4 source guard entries.
495