Saving Configuration - D-Link DI-1750 Reference Manual

1.6 Cancel A Command
If you want to cancel a command or restore it to default properties, you can select U or u option at
prompt rightly after inputting most of the commands.
For example, when deleting a configured static route, please select the U option at prompt after
inputting the ip command, and then select route option, finally, input the parameter values of the route
that you are about to delete.

1.7 Saving Configuration

You may need to save the configuration changes, so that you can quickly restore the original
configuration in case of the system rebooting or power off failure. Write command can be used for
saving the configuration under the Management or Global Configuration Directory.
Model Name
- 3 -