D-Link DI-1750 Reference Manual page 530

Please Input the code of command to be execute(0-0): 0
Please input a string:200
Key Word:
Q(quit)
(00)forward-time
(01)hello-time
(02)max-age
(03)priority
(04)<cr>
Please Input the code of command to be execute(0-4): 1
Key Word:
Q(quit)
(00)<1-10>
Please Input the code of command to be execute(0-0): 0
Please input a digital number:4
Will you execute it? [Y]:
[DEFAULT@lns /config/]#
16.1.6 Configure Max Age Time for Spanning Tree
Setting the packet valid time when the switch is root by configuring the Max Age Time for Spanning
Tree.
Use the following commands to configure Max Age Time for spanning tree:
Command
spanning-tree {sstp | vlan
vlan-id} max-age time
spanning-tree undo {sstp |
vlan vlan-id} max-age time
The following commands configure VLAN 200 valid time to 24 seconds.
[DEFAULT@lns /config/]#span
Key Word:
U(undo) Q(quit)
(00)mode
(01)vlan
(02)sstp
(03)backbonefast
(04)uplinkfast
(05)portfast
(06)loopguard
Please Input the code of command to be execute(0-6): 1
Key Word:
Q(quit)
(00)WORD VLAN IDs such as (1,3,5,7) Or (1,3-5,7) Or (1-7)
Please Input the code of command to be execute(0-0): 0
Please input a string:200
Key Word:
Q(quit)
(00)forward-time
(01)hello-time
(02)max-age
(03)priority
(04)<cr>
Please Input the code of command to be execute(0-4): 2
Key Word:
vlan mode forward time
vlan mode hello time
vlan mode max age
vlan mode priority
vlan mode hello time
Change the Max Age Time for SSTP mode.Change pvst
spanning tree Max Age Time for vlan whose vlan ID value is
vlanID.
Cancle the Max Age Time.
Setup spanning-tree protocol mode
Setup spanning-tree protocol on vlans
Setup spanning-tree protocol on sstp mode
Setup spanning-tree protocol backbonefast function
Setup spanning-tree protocol uplinkfast function
Setup spanning-tree protocol portfast function
Setup spanning-tree protocol loopguard function
vlan mode forward time
vlan mode hello time
vlan mode max age
vlan mode priority
Model Name
Function
- 528 -