D-Link DI-1750 Reference Manual page 174

The next connection request will cause the router to allocate 1.1.1.2 for the inside local address. To
configure destination address rotary translation, use the following commands beginning in global
configuration mode. These commands allow you to map one virtual host to many real hosts. Each new
TCP session opened with the virtual host will be translated into a session with a different real host.
Command
ip nat pool name start-ip end-ip
netmask
ip access-list
access-list-name
source [source-mask]
ip nat inside destination list
access-list-name pool name
interface type number
ip nat inside
interface type number
ip nat outside
Step 1.
[DEFAULT@router /config/]#ip
Key Word:
U(undo) D(default) Q(quit)
(00)access-list Named access-list
......
(13)nat NAT configuration commands
......
Please Input the code of command to be excute(0-20): 13
Input 13,select nat option，prompt is as below:
(00)inside Inside address translation
(01)log NAT Logging
(02)outside Outside address translation
(03)pool Define pool of addresses
(04)translation NAT translation entry configuration
Please Input the code of command to be excute(0-4): 3
Input 3，select pool option，prompt is as below:
(00)WORD Pool name
Please Input the code of command to be excute(0-0): 0
Input 0，select WORD option，prompt is as below:
Please input a string:
Input pool name, prompt is as below:
(00)A.B.C.D Start IP address
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input start ip address，prompt is as below:
(00)A.B.C.D End IP address
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:192.168.1.8
Input ip address，prompt is as below:
(00)A.B.C.D Network mask
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:255.255.255.0
Model Name
Defines a pool of addresses containing the addresses of the
real hosts.
Defines an access list permitting the address of the virtual
standard
host.
config-permit
Establishes dynamic inside destination translation, specifying
the access list defined in the prior step.
Specifies the inside interface.
Marks the interface as connected to the inside.
Specifies the outside interface.
Marks the interface as connected to the outside.
- 172 -
Purpose