D-Link DI-1750 Reference Manual page 84

Hide thumbs Also See for DI-1750:
Table of Contents

Advertisement

Key Word:
U(undo)
D(default)
......
(07)idle
(08)incallcheck
......
Please Input the code of command to be excute(0-26): 7
Key Word:
Q(quit)
(00)<0-2147483647>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:Please input a string:300 (input the idle time)
Will you excute it? (Y/N):y
Refer to the "typical X.25 configuration examples" for the SVC idle time configuration examples.
2. configure the X.25 negotiation parameters
X.25 software provides commands which support configuration of X.25 negotiation parameters and
allow D bit settings,
To set supported X.25 negotiation parameters, use the command given below in interface configuration
mode:
x25 (undo) dbit
x25 (undo) nps
x25 (undo) nws
x25 (undo) cwla
Key Word:
U(undo)
D(default)
......
(29)snmp
(30)x25
Please Input the code of command to be excute(0-30): 30
......
(02)cwla
(03)dbit
......
(15)nps
(16)nui
(17)nws
......
Please Input the code of command to be excute(0-26): 03 (choose 03,15,17,02 respectively to
implement the configuration)
Will you excute it? (Y/N):y
5.5.12 Configure the X.25-TCP switching parameters
User can configure the X.25-TCP switching parameters with the following command
in interface configuration mode ( this function is not in the formal version but only provided in some
probational version).
x25 (undo) tcp user-data line
Q(quit)
Set inactivity time before clearing SVC
Check calling address in incall packet or not
Idle time for X.25 SVC connection of IP keep alive(second)
Command
Q(quit)
Modify SNMP interface parameters
Set parameters for X.25
Call with/without local address
Use Dbit mode or not
Enable/Disable packet size negotiation
Set network user identity
Enable/Disable window size negotiation
Command
Model Name
Purpose
Set to use the D bit setting whether or not
enable/disable packet length negotiation
enable/disable packet window size negotiation
X.25 call request packet with a host address
Purpose
Set the user-data utilized by x25-tcp in the interface
- 82 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-2621Di-2630Di-3660

Table of Contents