Table of Contents
Advertisement
Input the command "cd config" to enter the global configuration mode.
Step 2:
Input the command "interface", list all the parameters:
(00)FastEthernet
(01)Ethernet
(02)Serial
......
Please Input the code of command to be excute(0-10): 0
Input 0，choose the item "fast Ethernet", it will prompt：
Please input a interface name:
Input the fast ethernet, slot and port name.
Step 3：
Choose the item 20 of prompt, it will list all the parameters:
(00)access-group
(01)address
(02)beigrp
......
Please Input the code of command to be excute(0-19): 1
Input 1，choose the item "address", it will prompt：
(00)A.B.C.D
(01)dhcp
Please Input the code of command to be excute(0-1): 0
Input 0，choose the item "A.B.C.D", the prompt is ：
Please input a IP Address:
Input the IP address, it will prompt：
Please input a IP Address:
Input the mask.
3.7.2 Configure the rate of FastEthernet
The rate of FastEthernet executed through self-negotiation as well as configuration on interface.
Command
Speed {10|100|auto}
speed (default)
Choose the item 35 of prompt, it will display that:
U(undo) D(default) Q(quit)
(00)10
Set 10-Mbps
(01)100
Set 100-Mbps
(02)auto
Set auto-speed
Please Input the code of command to be excute(0-2):
Input 0 to set the speed as 10M.
Input D or d, it will come back to default settings.
FastEthernet interface
Ethernet interface
Serial interface
Specify access control for packets
IP address
Enhanced Interior Gateway Routing Protocol
IP address
IP Address negotiated via DHCP
参数
Set the rate of FastEthernet as 10M, 100M or self-negotiation.
Restore the default setting with the rate is self-negotiation.
Model Name
参数说明
Function
- 15 -
Hide quick links:
Advertisement
Table of Contents
