Table of Contents
Advertisement
Please Input the code of command to be excute(0-4):
Select
destination-address
On the port connected with certral router and stub router:
Command
interface type number
ip pim-dm neighbor-filter
access-list
Step1：
input interface Command，prompt is as below:
(00)FastEthernet
(01)Ethernet
......
Please Input the code of command to be excute(0-10):
Select port type，prompt is as below:
Please input a interface name:
input port name.
Step2:
In the prompt select 17 option ，prompt is as below:
(00)access-group
......
(15)pim-dm
......
Please Input the code of command to be excute(0-21): 15
input 15，Select pim-dm option ,prompt is as below:
(00)dr-priority
......
(04)neighbor-filter
......
Please Input the code of command to be excute(0-5): 4
input 4，Select neighbor-filter option ，prompt is as below:
(00)WORD
Please Input the code of command to be excute(0-0): 0
input 0，Select WORD option ，prompt，
Please input a string:
input access-list.
7.3.12 Clear multicast buffer and routing table
If you consider a special buffer or routing table is invalidated, you can clear its content. Use this
command in management directory:
Command
clear ip igmp group [type
number]
<cr>]
clear
ip
group-address
source-address]
Take the first command for an example.：
input clear Command，prompt is as below:
(00)arp-cache
.
Enter into port configuration.
Filter all pim messages sent to stud router.
FastEthernet interface
Ethernet interface
Specify access control for packets
PIM-DM interface commands
PIM-DM router DR priority
PIM-DM peering filter
IP Named Standard Access list
Clear items in IGMP cache.
[group-address
|
[*
|
Clear items in multicast routing table.
mroute
|
Clear the entire ARP cache
Model Name
Purpose
Purpose
- 320 -
Hide quick links:
Advertisement
Table of Contents
