D-Link DI-1750 Reference Manual page 342

Key Word:
Q(quit)
(00)WORD
(01)default
Please Input the code of command to be excute(0-1): 0
Please input a string:lista （Input Authentication list name）
Will you excute it? (Y/N):y
The keyword "list-name" is to name any string of a created list. The keyword "method" defines the
actual method that used in an authentication process. If only the former method returns to the
authentication error, other methods will then be used; If the former methods turns out to be failed, there
will be no more attempt to authenticate with other methods. If you want to designate to launch a
successful login even if all methods have returned to authentication erro, simply specify "none"in the
command line as the last authentication method. For instance, Even if the TACACS+ service has
returned to error, the authentication can still succeed, using the following command:
aaa (default) authentication login tacacs+ none
You can setup a default list with default parameters. The default list is automatically applied to all
interfaces. For instance, you can use the following command when designating RADIUS as the
default authentication method for users to login:
aaa (default) authentication login radius
Note:
Since the keyword none enables any uesr that has logged in to successfully pass the authentication, you shall have to keep
this keyword as the backup method.
Following table lists the currently supported login authentication methods.
Key Word
enable
group
group-restrict
line
local
local-case
none
radius
tacacs+
2. Login Authentication With Enable Password
Use the aaa authentication login command with the enable method keyword to specify the enable
password as the login authentication method. For example, to specify the enable password as the
method of user authentication at login when no other method list has been defined, enter:
aaa (default) authentication login enable
3. Login Authentication Using Line Password
Use the aaa authentication login command with the line method keyword to specify the line password
as the login authentication method. For example, to specify the line password as the method of user
authentication at login when no other method list has been defined, enter the following:
aaa (default) authentication login line
Before you can use a line password as the login authentication method, you need to define a line
password.
Model Name
Authentication list name
Use the default authentication list
Use enable password to authenticate.
Use a server group to authenticate.
Use a server group to authenticate, but when a user has specified some
server, this group will be invalidated.
Use a line password to authenticate.
Use a local database to authenticate.
Use a local database to authenticate(the user name is case-sensitive).
The authentication can pass unconditionedly.
Use RADIUS authentication.
Use TACACS+ authentication.
- 340 -
Description