Accessing The Configuration Manager - D-Link DSL-1501G User Manual

Accessing the Configuration Manager

Now that your computer's IP settings allow it to communicate with the Router, you can access the configuration
software.
To use the web-based management software, launch a suitable web browser and direct it to the IP address of the
Router. Type in http:// followed by the default IP address, 192.168.0.1 in the address bar of the browser. The
URL in the address bar should read: http://192.168.0.1.
In the page that opens, click on the Login button.
DSL-1500G SHDSL Ethernet Router User's Guide
NOTE: Be sure that the web browser on your computer is not configured to
use a proxy server in the Internet settings. In Windows Internet Explorer, you
can check if a proxy server is enabled using the following procedure:
1. In Windows, click on the START button, go to Settings and choose
Control Panel.
2. In the Control Panel window, double-click on the Internet Options
icon.
3. Click the Connections tab and click on the LAN Settings button.
4. Verify that the "Use proxy server" option is NOT checked. If it is
checked, click in the checked box to deselect the option and click OK.
Alternatively you can access this Internet Options menu using the Tools pull
down menu in Internet Explorer.
Login Page
9
Login here