D-Link DI-1750 Reference Manual page 286

6.14.8 Defines static host name-to-address mapping
Any IP address can correspond to a name, and the same name can correspond to many IP addresses.
By doing this, the command such as telnet，ping can use the names directly.
In congure use the following command：
ip host name address1[address2,
no ip host name [address1,
In orde to Defines static host name-to-address mapping, you should input command
and all the arguments will be listed:
(00)access-list
......
(10)host
......
Please Input the code of command to be excute(0-20):
Input 10，select host, and it will hint：
(00)WORD
Please Input the code of command to be excute(0-0):
Input 0，select WORD, and it will hint：
Please input a string：
Input host name, and it will hint：
(00)A.B.C.D
Please Input the code of command to be excute(0-0):
Input 0，select A.B.C.D, input IP address, and it will hint：
(00)A.B.C.D
(01)A.B.C.D <cr>
Input 0， you may input more ip address, that is, the same host name can map more than one ip address;
if you input 1, input finished
Example：the following express mapping a name to several IP addresses
router_config# ip host djh 172.16.20.209
router_config# ip host djh 172.16.20.210
or：
router_config# ip host djh 172.16.20.209 172.16.20.210
If you want to delete, you can delete a IP address or delete many addresses or delete the host.
router_config# no ip host djh 172.16.20.209
router_config# no ip host djh 172.16.20.209 172.16.20.210
/**delete 2 IP address mapping to a host name djh*/
router_config# no ip host djh
6.14.9 Specify times to retry a DNS query
When sending failing or not receiving the correspond, it can send again. By default , the retry times is 3
(times). You can modify the retry times when neeing.
In congure use the following command:
ip domain retry count
no ip domain retry
Command
... ]
... ]
Named access-list
Add an entry to the IP host name-address table
Name of host
Host IP address
Host IP address
Command
Model Name
Map a name to some IP address
Delete a map.
10
0
0
/*delete a IP address mapping to a host name djh*/
/*delete the host named djh*/
Set retry times.
Restore to the default.
- 284 -
function
ip
function
in configure,