D-Link DI-1750 Reference Manual page 290

(2) By clock
(3) If the binding command is used, it will add or delete a mapping in primary server.
(4) When the IP address of a interface changes
(5) When the interface having been binded is shut up or is deleted
In congure use the following command：
Command
ip domain bind name interface number
ip domain bind name interface number singly
no ip domain bind name interface number
ip domain bind name ip_addr
ip domain bind name ip_addr singly
no ip domain bind name ip_addr
no ip domain bind name
In order to bind the domain name to a IP address or IP address of interface, you should input 在 the
command in configure, and all the arguments will be listed：
ip
(00)access-list Named access-list
......
(03 domain IP DNS Resolver
......
Please Input the code of command to be excute(0-20):
Input 3，select domain, and it will hint：
(00) lookup Enable IP DNS hostname translation
.......
(09) bind Bind the domain name to this interface
Please Input the code of command to be excute(0-0):
Input 9，select bind,and it will hint：
(00) WORD
Domain name
Input 0，select WORD, and it will hint：
Please input a string：
Input the domain name , and it will hint：
(00)interface
Interface configuration
(01)A.B.C.D IP address of the domain name
Input 0，select interface,input the interface；
Input 1，select A.B.C.D, input the ip address
Note:
If the command ip domain dynamic enable or ip domain primary-server is not been configurated , then command ip
domain bind and no ip domain bind will not be successful，and will not be in flash memory or be deleted from flash
memory.
Model Name
Bind the domain name to the primary IP address of
interface
（Note: an interface can only correspond to one domain
name, when you use another,the later will replace for the
earlier.
Bind the domain name to the primary IP address of
interface, and delete all the hosts named name in primary
server
Delete the mapping of the domain name to the primary
IP address of interface
Bind the domain name to a IP address
（ Note ： the same domain name can correpond to
serveral IP addresses）
Bind the domain name to a IP address, and delete all the
hosts named name in primary server
Delete the mapping of
address
Delete all the hosts named name in the primary server
3
9
- 288 -
Function
the domain name to the IP