D-Link DI-1750 Reference Manual page 107

(01)caller
......
Please Input the code of command to be excute(0-11): 1 （you could also choose 0 to configure the called
dialstring）
Key Word:
Q(quit)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:12345678 （input caller dialstring）
Will you excute it? (Y/N):y
♦ configuring the dialstring designated by Caller on the Answerer.
Input "user" in the configurative mode, it will prompt:
[DEFAULT@Router /config/]#user
Key Word:
U(undo)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:dlink （input username）
Key Word:
Q(quit)
(00)autocommand
(01)callback-dialstring
......
Please Input the code of command to be excute(0-8): 1
Key Word:
Q(quit)
(00)dial-string
Please Input the code of command to be excute(0-0): 0
Please input a string:123456 （input password）
Key Word:
Q(quit)
......
(06)user-maxlinks
(07)<cr>
Please Input the code of command to be excute(0-7): 7
Will you excute it? (Y/N):y
Answerer has the priority to inquire user xx password xx callback-dial string, and then inquire
set-dialer called xx. In addition, use the symbol "," to separate the central telephone number and
branch number, use the symbol ";" to separate the different numbers. The symbol "*" indicates the
telephone number that specified by Caller.
5.7.6 Configuring IP Address Pool
A point-to-point interface must be able to provide a remote node with its IP address through the IP
Control Protocol (IPCP) address negotiation process. The IP address can be obtained from a variety of
sources. The address can be configured through the command line, entered with an EXEC-level
command, provided by TACACS+ or from a locally administered pool.
1. Peer Address Allocation
A peer IP address can be allocated to an interface through several methods:
♦ IPCP negotiation—If the peer presents a peer IP address during IPCP address negotiation and no
other peer address is assigned, the presented address is acknowledged and used only in the
current session.
♦ Default IP address—The peer default ip address can be used to define by config-peer default ip
address command.
Specify calling telephone number to be screened
D(default) Q(quit)
Callback dialstring
Dialstring
Model Name
Dialer caller string
User name
Automatically issue a command after the user logs in
Limit the user's number of inbound links
- 105 -