D-Link DI-1750 Reference Manual page 187

(02)pool
(03)ping
(04)write-time
Please Input the code of command to be excute(0-4): 3
input 3，Selectping option ，prompt is as below:
(00)packets
(01)timeout
Please Input the code of command to be excute(0-1):0
Select 0，specify the amount of sending ICMP messages.
Select 1，specify the timeout of waiting ICMP corresponding.
Key Word:
Q(quit)
(00)<0-10> Number of ping packets (0 disables ping)
Please Input the code of command to be excute(0-0): 0
Please input a digital number:2（input message amount，2 is only an example.）
Will you excute it? (Y/N):y
6.5.4 Configure parameters of saving database
To configure the interval of saving the information of address allocation into agent database, please
execute the following command in global configure directory:
Command
ip dhcpd write-time time
input ipCommand，prompt is as below:
(00)access-list
......
(05)dhcpd
......
Please Input the code of command to be excute(0-20): 5
input 5，Selectdhcpd option ，prompt is as below:
(00)enable
(01)disable
(02)pool
(03)ping
(04)write-time
Please Input the code of command to be excute(0-4): 4
input 4，Selectwrite-time option to configure the interval.
6.5.5 Configure DHCP Server address pool
To add DHCP Server address pool, please execute the following command in global configure
directory:
Command
Ip dhcpd pool name
input ip Command，prompt is as below:
(00)access-list
......
(05)dhcpd
......
Please Input the code of command to be excute(0-20): 5
input 5，Selectdhcpd option ，prompt is as below:
Configure DHCP address pools
Specify icmp parameters used by DHCP
Specify icmp parameters used by DHCP
Specify number of icmp packets
Specify icmp timeout
Specify the interval of saving the address allocating information
into agent database.
Named access-list
Specify server parameter
Enable DHCP Serveice
Disable DHCP Service
Configure DHCP address pools
Specify icmp parameters used by DHCP
Specify icmp parameters used by DHCP
Add DHCP Server address pool and enter into DHCP address
pool configuration mode.
Named access-list
Specify server parameter
Model Name
Function
Function
- 185 -