D-Link DI-1750 Reference Manual page 319

(00)access-group
......
(11)multicast
......
Please Input the code of command to be excute(0-22): 11
input 11Select multicast option ，prompt:
(00)boundary
(01)helper-map
(02)rate-limit
(03)ttl-threshold
Please Input the code of command to be excute(0-3): 1
input 1，Select helper-map option ，prompt is as below:
(00)broadcast
(01)A.B.C.D
Please Input the code of command to be excute(0-1): 0
Select 0 option ，prompt is as below:
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Select 0 option ，prompt is as below:
Please input a IP Address:
input group-address，prompt is as below:
(00)WORD Access-list name
Please Input the code of command to be excute(0-0): 0
Select 0 option ，input
Step3:
In the prompt select 17 option ，prompt is as below:
(00)access-group
(01)address
(02)beigrp
(03)directed-broadcast Enable forwarding of directed broadcasts
......
Please Input the code of command to be excute(0-21): 3
input 3，Select directed-broadcast option .
Step4：
In global configure directory input ipCommand，prompt is as below:
(00)access-list
......
(09)forward-protocol
......
Please Input the code of command to be excute(0-25): 9
input 9，Select forward-protocol option ，prompt is as below:
(00)udp Packets to a specific UDP port
Please Input the code of command to be excute(0-0): 0
input 0，Select udp option ，prompt is as below:
(00)<0-65535> Port number
(01)biff Biff (mail notification, comsat, 512)
(02)bootpc Bootstrap Protocol (BOOTP) client (68)
......
Please Input the code of command to be excute(0-27):
Select port .
On the last hop router connected with destination broadcast network:
Command
interface type number
Model Name
Specify access control for packets
Config ip multicast parameter
Config ip multicast boundary
Config ip multicast helper map
Config ip multicast rate-limit term
Config interface ttl threshold
Broadcast Address
IP Multicast Address
IP Multicast Address or IP Broadcast Address
access-list .
Specify access control for packets
IP address
Enhanced Interior Gateway Routing Protocol
Named access-list
Controls forwarding of directed IP broadcasts
Enter into port configure mode.
- 317 -
Purpose