D-Link DI-1750 Reference Manual page 323

......
(05)ip
......
Please Input the code of command to be excute(0-15): 5
input 5，Select ip option ，prompt is as below:
(00)beigrp Clear BEIGRP
......
(03)igmp IGMP clear commands
......
Please Input the code of command to be excute(0-7): 3
input 3，Select igmp option ，prompt is as below:
(00)group
Please Input the code of command to be excute(0-0): 0
input 0，Select group option ，prompt is as below:
(00)interface-name
Please Input the code of command to be excute(0-0): 0
input 0，Select interface-name option ，prompt is as below:
Please input a interface name:f0/0
input port ,prompt is as below:
(00)A.B.C.D
(01)<cr>
Please Input the code of command to be excute(0-1):
Select parameter .
Show multicast routing table and system statistics
Through showing IP multicast routing table, concerned buffer or database, you can examine the source
usage and resolve some network problems.
Use this command in management directory to observe the statistics about multicast route:
Command
show ip igmp groups [type
|
number group-address]
[detail]
show ip igmp interface [type
number]
show ip mroute mfc
show ip rpf [ucast | mstatic |
pim-dm | pim-sm | dvmrp]
source-address
Take the first command for an example.：
input show Command，prompt is as below:
(00)alias alias for command
......
(21)ip
......
Please Input the code of command to be excute(0-49): 21
input 21，Select ip option ，prompt is as below:
(00)access-lists List IP access lists
......
(08)igmp
......
Please Input the code of command to be excute(0-26): 8
input 8，Select igmp option ，prompt is as below:
(00)groups
(01)interface
Model Name
IP
IGMP clear multicast-group commands
IP group address
Display multicast information in IGMP group.
Display IGMP configuration information on the
port
Display multicast forwarding cache.
Display RPFinformation
IP information
IGMP information
IGMP group membership information
IGMP group membership information
Purpose
- 321 -