D-Link DI-1750 Reference Manual page 432

Please input a string:2
note：Input dialer string here,for example,2.
Will you excute it? (Y/N):y
10.4.2 Send calls to several interfaces and accept calls from them
In command to send calls to several interfaces and accept calls from them, you can perform the
configuration tasks below.
enter physical interface configuration mode interface
(pls see the above section send call to an interface and accept call from the one for concrete
configuration)
configuring the dialer method: line dial
(pls see the above section send call to an interface and accept call from the one for concrete
configuration)
configuring ip address: ip address ip-address [ net-mask ]
(pls see the above section send call to an interface and accept call from the one for concrete
configuration)
configuring dialer map: dialer map next-hop-address [ name hostname ] [ broadcast ] dialer-string
(pls see the above section send call to an interface and accept call from the one for concrete
configuration)
configuring several dialer maps list
10.4.3 Configuring dialer with dialer interface
Define dialer interface corresponding to the dialer, the command is: interface dialer number
[DEFAULT@Router config]#interface
Key Word:
U(undo) D(default) Q(quit)
(00)FastEthernet FastEthernet interface
.......
(07)Dialer Dialer interface
(08)Multilink Multilink-group interface
(09)Virtual-template Virtual template interface
(10)Virtual-tunnel Virtual tunnel interface
Please Input the code of command to be excute(0-10): 7（select Dialer interface）
Please input a interface name:d3
Note:input interface name here.
Will you excute it? (Y/N):y
Configuring ip address to the dialer rotary group:
Key Word:
Q(quit)
(00)bandwidth Set the interface bandwidth
(01)chinese help message in Chinese
(02)chmem Change memory of system
(03)clear_drv clear interface statistic counter
(04)crypto Encryption module
(05)default restore default configuration
(06)delay Set the interface delay
(07)description Set the interface description
(08)dialer Dial-on-demand routing (DDR) commands
(09)dialer-group Assign interface to dialer-list
(10)english help message in English
(11)exit exit / quit
Model Name
interface-type interface-number
ip-address [ net-mask ]
ip address
- 430 -