D-Link DI-1750 Reference Manual page 404

(18)ip IP information
(19)job Job parameters and statistics
(20)l2tp L2TP information
(21)line TTY line information
(22)llc LLC2 parameters and statistics
(23)logging Show the contents of logging buffers
(24)memory memory info
(25)pdp pdp State information
(26)policy-map show policy-map configuration
(27)ppp PPP parameters and statistics
(28)queue show queue contents
--More--
28
Input 28, select queueoption.
Key Word:
Q(quit)
(00)FastEthernet
(01)Ethernet
(02)Serial
(03)Async
Please Input the code of command to be excute(0-3): 1
Note：Input interface type here, 1 is only for example.
Please input a interface name:f0/0
Note：Input interface name here, f0/0is only for example.
Will you excute it? (Y/N):y
The screen will display the queue information like the following:
priority-list 2
Output queues: (queue :size/max/drops):
high: 0/50/0 middle: 0/24/0 normal: 0/1/0 low: 0/1/0
2. Display The Customed List Configuration
In command to display the customed queueing configuration, you can use the command below:
Command
show queueing custom
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
(08)controller Interface controller status
(09)cpu cpu usage information
(10)debug State of each debugging option
(11)dhcp DHCP information
(12)dialer Dialer parameters and statistics
(13)frame-relay Display Frame Relay state
(14)frswitch Display Frame Relay switch state
(15)hdlc HDLC parameters and statistics
(16)hosts Host table
(17)interface interface status and configuration
(18)ip IP information
FastEthernet interface
Ethernet interface
Serial interface
Asynchronous interface
Displaying the customed queueing configuration.
Bakup status
Model Name
Purpose
- 402 -