D-Link DI-1750 Reference Manual page 41

SNMPv2C--- Community based management frame of SNMPv2. Test protocol of internet that defined
in RFC1901.
D-Link Router support following SNMP versions:
SNMPv3 .
SNMPv1 utilizes community based security mode to access management port that the agent of MIB.
The community is definited by IP address Access Control List and password. The agent of SNMP must
be configured as the version that supported by management workstation. The agent is able to
communicate with various management ports.
3. Supported MIB
D-Link SNMP supports the entire MIB II variable (described at RFC 1213) and SNMP trap (described at
RFC 1215).
D-Link provides private MIB extension for each system.
4.1.3 Creat or modify the access control for SNMP community
The relation of SNMP management port and agent is definited by SNMP community character string.
The community character string similar as the password that allows accessing the agent of Router. The
optional item is to assign one or several features concern with community character string as below:
Community character string is allowed to acquire the IP address access list of SNMP management port
with authority of agent access.
To define the MIB view for the entire MIB object subset with accessing authority of assigned community.
Assign the read/write authority of community that has the authority to access MIB object.
Configure community character string in the mode of global configuration:
Command
snmp-server community string
[view view-name] [ro | rw]
[word]
Input the command "snmp-server", it will prompt:
U(undo) D(default) Q(quit)
(00)community
(01)contact
(02)host
......
Please Input the code of command to be excute(0-8): 0
Input "0"，choose the item "community", it will prompt:
(00)WORD
Please Input the code of command to be excute(0-0): 0
Input 0， choose the item "WORD", it will prompt:
Please input a string:
Input the string，then it will prompt：
(00)WORD
(01)ro
(02)rw
(03)view
(04)<cr>
Please Input the code of command to be excute(0-4):
Choose the parameter you want to configure.
One or more community can be configured. Use the command no snmp-server community to erase
the given community character string.
Define the community accessing character string
Enable SNMP; set community string and access privs
Text for mib object sysContact
Specify hosts to receive SNMP TRAPs
SNMP community string
Std IP accesslist allowing access with this community string
Read-only access with this community string
Read-write access with this community string
Restrict this community to a named MIB view
Model Name
Function
- 39 -