D-Link DI-1750 Reference Manual page 53

After configuring an item of alarm, device will get the oid value designated by variable every interval
seconds, and compare the value with former one according to the alarm type(absolute or delta), if the
current value is larger and exceed the limitation designated by the rising-threshold, the event whose
index is eventnumber will be induced.（if the eventnumber is 0 or the event table doesn't has an event
whose index is eventnumber, the event will not be induced）.vice versa； if the oid designated by
variable can not be get, the alarm table status of this line will be set as invalid. When the command
"rmon alarm" is used many times to configure the same index of alarm item, only the parameters of last
time is available. You can use the command "no rmon alarm index" to delete the alarm table whose
index is index.
4.4.2 Configuring the RMON event function
The steps of configuring the RMON event are listed below:
Command
cd config
rmon event index [description
string] [log] [owner string] [trap
community]
cd..
write
[DEFAULT@Router /config/]#rmon
Key Word:
U(undo) D(default)
(00)alarm
(01)event
Please Input the code of command to be excute(0-1): 1
Key Word:
Q(quit)
(00)<1-65535>
Please Input the code of command to be excute(0-0): 0
Please input a digital number:10 (input event number)
Key Word:
Q(quit)
(00)description
(01)log
......
Please Input the code of command to be excute(0-4): 0
Key Word:
Q(quit)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:fire （input Event description）
Key Word:
Q(quit)
(00)log
(01)trap
......
参数
Enter the global configurative mode
Add a RMON event table
index is the index of the items，its range is 1~65535
description is the descriptive information of the event
log means that a log message will be added to the log table
whenever the event is induced.
trap means that a trap is generated when the event is induced,
community is the group name.
owner string can be used to describe some descriptive message
of the event.
Back to management mode
Save the configuration
Q(quit)
Configure an RMON alarm
Configure an RMON event
event number
Specify a description of the event
Generate RMON log when the event fires
Event description
Generate RMON log when the event fires
Generate SNMP trap when the event fires
Model Name
参数说明
Function
- 51 -