D-Link DI-1750 Reference Manual page 453

Key Word:
Q(quit)
(00)H:H:H:H:H:H
Please Input the code of command to be execute(0-0):
Input 0, it will hint :
Please input a mac address :
You can input a virtual mac address here.
3. Configure Standby Group Priority
In congure use the following command：
standby [group-number] priority priority-value
standby (undo) [group-number] priority
You should input command standby in interface configure model , and it will show all the arguments:
(00) arp
......
(34) standby
......
Please Input the code of command to be excute(0-35): 34
Input 34，select domain, it will hint：
U(undo) D(default) Q(quit)
(00)<0-255>
......
(03)priority
......
Please Input the code of command to be excute(0-2): 3 , it will hint
Key Word:
Q(quit)
(00)<1-255>
Please Input the code of command to be execute(0-0):
Input 0, it will hint :
Please input a digital number:
You can input a priority level here .
4. Configure Standby Group Preempt Model
In congure use the following command：
standby
delay-timer]
standby (undo) [group-number] preempt [delay
delay-timer]
You should input command standby in interface configure model , and it will show all the arguments:
(00) arp
......
(34) standby
......
Please Input the code of command to be excute(0-35): 34
Input 34，select domain, it will hint：
U(undo) D(default) Q(quit)
(00)<0-255>
48-bit hardware address of ARP entry
Command
set arp timeout
HSRP configuration commands
HSRP Group ID
Config HSRP group priority level
Priority value
Command
[group-number]
preempt
set arp timeout
HSRP configuration commands
HSRP Group ID
Model Name
Specify a standby group priorty.
Use default standby group priorty.
[delay Enable standby preempt model.
Disable standby preempt model.
- 451 -
Purpose
Purpose