D-Link DI-1750 Reference Manual page 401

Please Input the code of command to be excute(0-0): 0
Input 0, select <1-16>option, it will prompt to input the PQ number.
Please input a digital number:1
Note：Input numbers of 1-16 PQ list, 1 is only for example.
Key Word:
Q(quit)
(00)interface Establish priorities for packets from a named interface
(01)protocol Establish priorities for packets of a protocol
(02)queue-limit set queue limit for priority queue
(03)default set custom queue for unspecified packets
Please Input the code of command to be excute(0-3): 1
Input 1, select <protocol> option：
Key Word:
Q(quit)
(00)ip internet protocol
(01)arp Address Resolution Protocol
(02)comp_tcp Compressed Tcp
Please Input the code of command to be excute(0-2): 0
Note：Input the protocol types here, 0 is only for example.
Key Word:
Q(quit)
(00)high
(01)middle
(02)normal
(03)low
Please Input the code of command to be excute(0-3): 1
Note：Input PQ here, 1 is only for example.
Key Word:
Q(quit)
(00)gt Classify packets greater than a specified length
(01)lt Classify packets less than a specified length
(02)fragments Prioritize fragmented IP packets
(03)list to specify an access list
(04)tcp Prioritize TCP packets 'to' or 'from' the specified port
(05)udp Prioritize UDP packets 'to' or 'from' the specified port
(06)<cr>
Please Input the code of command to be excute(0-6): 0
Note：Input the keyword types here, 0 is only for example.
Key Word:
Q(quit)
(00)<0-65535> packet length(include MAC encapsulation)
Please Input the code of command to be excute(0-0): 0
Input 0，select <0-65535> option：
Please input a digital number:34
Note： Input values of the 0－65535 keywords here, 34 is only for example.
Will you excute it? (Y/N):y
Model Name
- 399 -