D-Link DI-1750 Reference Manual page 232

neighbor ip-address cost number
Step1：
In the prompt Select 18 option ，it will list all arguments ：
(00)access-group
......
(10)ospf set OSPF parameter for this port
......
Please Input the code of command to be excute(0-18): 10
input 10，Select ospf option ，prompt is as below:
(00)cost Interface cost
......
(05)network
......
Please Input the code of command to be excute(0-10): 5
input 5，Select network option ，prompt is as below:
(00)broadcast
(01)non-broadcast
(02)point-to-multipoint
(03)point-to-point
Please Input the code of command to be excute(0-3): 2
input 2，Select point-to-multipoint option ，prompt is as below:
(00)broadcast
(01)non-broadcast
(02)<cr>
Please Input the code of command to be excute(0-2): 0
input 0，Select broadcast option .
Step2：
Input exit Command，enter into the global configure directory .
Step3：
Input router Command，prompt is as below:
(00)beigrp Enable BEIGRP (compatible with eigrp)
(01)bgp Enable Border Gateway Protocol (BGP)
(02)ospf Enable Open Shortest Path First (OSPF)
(03)rip Enable Routing Information Protocol(RIP)
Please Input the code of command to be excute(0-3): 2
input 2，Select ospf option ，prompt is as below:
(00)<1-65535> Process ID
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input process-id.
Step4：
In the prompt Select 13 option ，prompt is as below:
(00)A.B.C.D Neighbor address
Please Input the code of command to be excute(0-0): 0
input 0，Select A.B.C.D option ，prompt is as below:
Please input a IP Address:
input IP ，then prompt is as below:
(00)cost OSPF cost for point-to-multipoint neighbor
(01)poll-interval OSPF dead-router polling interval
(02)priority OSPF priority of non-broadcast neighbor
(03)<cr>
Model Name
Specify a neighbor and assign a cost to the neighbor.
Specify access control for packets
Network type
Set to broadcast
Set to non-broadcast
Set to point-to-multipoint
Set to point-to-point
Point-to-multipoint with broadcast (default)
Point-to-multipoint with non-broadcast
- 230 -